News Details

Siemens partners with NTPC to boost power generation in south India

Post On :-

2015-10-11 13:05:29

News Description

Siemens Limited started dispatch of the largest-ever ‘Made in India’ single-phase Generator Step-Up (GSU) Transformer of rating 315 MVA, 23.5kV / 420kV for installation at NTPC’s Kudgi Super Thermal Power Station in Bijapur, Karnataka. This transformer is an essential component of the Power Station, which once operational will boost the highcapacity power generation for the southern states of Karnataka, Andhra Pradesh, Tamil Nadu and Kerala. NTPC has ordered 10 units of these GSU transformers on Siemens.


Normally the generated voltage is in the range of 11 kV to 24 kV which is not efficient to transmit the power through the transmission line. Generator transformer is a special purpose transformer used for stepping up generator voltage to high voltage (400 kV – 765 kV) for efficient transmission of generated power to load centers located at long distances.


Dr. Harald Griem, Executive Vice President and Head of Energy Management, Siemens Limited, said, “Siemens Limited has manufactured and successfully tested the first singlephase 315 MVA, 420kV Generator Transformer at its Kalwa factory. The Generator Transformer also successfully underwent short circuit withstand testing in the first attempt, at KEMA Laboratories in The Netherlands, which was also a first for the test lab, in terms of current capacity.”


With this milestone, Siemens has once again demonstrated its indigenous manufacturing and technology capabilities to meet the growing demands of the Indian power sector.



About Generator step-up transformers


Generator step-up transformers (GSU) are the critical link between the generating power station and the transmission network, often operated day and night at full load. They are built to withstand extreme thermal loading without ageing prematurely. Being a most criti-cal component of power system, reliability of such transformers is highly important. GSUs are provided with oil-air unit coolers resulting in compact overall dimensions of generating station.


They are also designed with low flux densities to withstand over voltages due to sudden load rejection conditions. Special design considerations are required for high current, low voltage in terms of windings & terminations to avoid hot spots in conducting and structural parts in its vicinity.


It functions as a two way transformer where it receives the power from the grid and feeds the plant station loads during plant start-up or on generator trip. In normal case it transfers the generated power from the generator to grid power supply as mentioned above.


It also isolates the generator with grid power in large power plants to safe guard the gen-erator during grid transients.




Recruiter Activityin the last 60 days

Great Benefits only on

  • More than 5, 00,000 Top Jobs waiting for you
  • Get headhunted by over 50,000 respected employers searching our resume database
  • Receive matching jobs on your email twice a week
  • Added Security Keep your job search secret Ensure privacy of your personal details

Register Now on and get set to receive your dream job.
Because you are worth more

© 2011 - 2016 - All Rights Reserved - Sabtaraf Corporate Solution Pvt. Ltd.